GlitterBug Lamps
GlitterBug functions through the magic of ultraviolet fluorescence. There are many possible light sources for ultraviolet light, the most recent and exciting being UV LEDs. Because of their high efficiency, they require only small batteries as a source of power. This does away with problems of finding a power source with the correct voltage. However, it is still true that UV fluorescent lamps are excellent for their high output over a large area. Whatever your needs, Brevis has you covered. Any questions? Call us. And for safety concerns, see this website under Safety Information.
The enhanced HandStand is a distinctive scientific-looking examination station featuring a thick aluminum base with bright UVA illumination and a magnifier lens. The base itself is printed with a plain white hand (plain under normal light, that is), but turn on the SpotShooters and lots of scary germs suddenly glow brightly all over the hand.
Two flexarms, each having a sturdy plastic clip on top that grips a SpotShooter 7 lamp, allow you to aim two beams for the best illumination. Lamps are very bright and will work well in most lighting environments but not in direct sunlight. Lamps are easily removable for hand-held use. The third flexarm has a 3X magnifier lens for detailed viewing.#RETN#RETNMinimal assembly required, tool and hardware included.
Click Here for more Info
GlitterBug® SpotShooter™ Keychain
Lamp has a high-intensity UVA LED light to show you those areas missed when hands are not washed properly. Attached to keychain, it's the perfect portable. Lamp body measures only 44mm in length, but is surprisingly bright. Includes 3 LR41 button batteries.
Click Here for more Info
UV SpotShooter 7 sports a sleek stylish body with two long-life Lithium batteries to power 7 bright UVA LEDs.
This convenient little lamp shines a beam directly out from the 7 LEDs without a lens to provide maximum illumination. The back end of the lamp can be screwed in all the way for continuous light, or it may be left unscrewed a half turn and then activated with the rubber button on the back end for momentary use. Manufactured from top quality anodized aluminum, lamp measures 108mm X 23mm. Includes two Lithium 123 batteries.
Click Here for more Info
This beautifully styled Lamp is both cute and convenient to use.
It has eight bright UVA LEDs and illuminates the perfect sized area for hand inspection. Turn the knob all the way in to activate, and twist it back out about a quarter turn to deactivate. Lamp will run for several hours on a single battery (included) and the LEDs should never wear out under normal usage.* The SpotShooter 8 clip on the back is used to fasten the lamp into the GlitterBuddy fold-up disclosure center. This clip can also be used on a strap or pocket, and it includes a hole for possible use with a lanyard. Lamp contains one Lithium 123 battery.
Click Here for more Info
GlowBar
This is the original classic GlowBar. Versatility is the name of the game here. It runs a good long time on 4 D batteries or it may be plugged in with the optional adapter. Use GlowBar as a portable unit to scan hands and surfaces. The 279mm UVA bulb (11 inch) illuminates a full pair of hands from one position. This is the same lamp that fits the GlitterBug Disclosure Center shown on page 7. GlowBar runs on 4 D-cell batteries (included) or plug it in with the optional AC/DC 6-volt adapter. Unit measures 324mm W X 79mm H X 41mm D.
Click Here for more Info
GlowBar II
Easily portable, GlowBar II fits into a typical handbag or attache case. Its UVA bulb measures approximately 140mm (5.5 inches). Unit runs on 4 AA-cell batteries (included). Measures 165mm W X 54mm H X 19mm D.
Click Here for more Info
Replacement 18-inch bulb for the MAXI VIEW BOX. Bulb fits into MAXI.LAMP.18 fixture within the MAXI VIEW BOX.
